VEVOR - The heating can automatically adjust to the set value of the thermostat. Simple operation - the internal circulation of the water heater is smooth, with no scum. Internal use of international cables, in line with international standards, without having to worry about product quality problems during use.
Safe & reliable - if the temperature of the water or thermostat housing exceeds 60°C 140°F, the high-temperature protection device will immediately trip. After the correct installation, the user rotates the control switch to set the temperature and the heating indicator lights.
Durable material - the inner tank of the thermostat is stainless steel, and it has a long service life without rust. The water will automatically heat up to the level set by the user and maintain the temperature. Adjustable temperature range of 20℃-40℃68℉-104℉, time can be freely set.
Smart thermostat - the thermostat comes with a temperature probe, which can sensitively sense the temperature of the pool water. It is suitable for heating constant temperature systems such as small hot springs, swimming pools, and jacuzzis. Multiple usages - jacuzzi water heater operation is fully automatic and easy to use. It is easy to disassemble. Once the flow is small or not enough water pressure, the thermostat will switch off the power automatically, prevents the thermostat from being damaged by dry burning.
Lucsiky - Please read the instructions and precautions carefully before use. After the water temperature is burned, uniform heat dissipation, unplug the power plug before using it and wait 20 seconds for safety Comprehensive anti-scalding design, prevent scalding.
The original intention of our product design is to allow the product to be heated for a long time, to ensure that the product is safe and durable, so that everyone can enjoy the bath in the bathtub.
The water level must be submerged in the metal parts of the electric heating rods. Because there is still heat on the surface of the heating tube, please do not Contact it by hand or put it on objects that are not resistant to high temperatures, so as not to burn the body and articles.
Use of dry water is strictly prohibited. This product cannot be used by children，During the heating of water, please do not Contact the water directly with your body, which may result in a slight.
Elecro - These heaters are very easy to install. However, they need to be hard wired they do not simply plug in. Elecro electric heaters come fully equipped including a super sensitive reversible flow switch which allows safe coupling to most pools including wooden pools and Intex style above ground pools.
With titanium elements making them suitable for saltwater pools. They also include a control thermostat, safety thermostat and an integral contactor relay.
Lecxin - It can also be used as the auxiliary heating of heat pumps. The control system constantly monitors the operation status of each part of the heater, responds quickly and displays corresponding prompt information to avoid any damage or failure.
When the pressure is lower than the set value, safe and reliable, the power is automatically turned off, you can use it at ease.
The temperature controller of the heater adopts a constant temperature controller, and the temperature sensor replaces the traditional electromagnetic flow switch, which is more convenient to use.
It supports intelligent temperature control, automatic constant temperature, and can adjust the water temperature as required, with the maximum setting temperature of about 55 ℃. The pool heater is specially used for small swimming pools with an area of less than 5 square meters, massage pools and hot springs to heat and keep warm.
ParaCity - The initial set temperature settings: COASTS equipped with ultra-high temperature protection thermostat switch, thermostat to limit overheating and protect users against danger.
If cold water is started, will be 6 ~ 8 °C / h elevated temperatures. Automatic heating: thermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on.
Coasts thermostat operation is fully automated, indicator light, temperature reaches a preset temperature, the heating is on, clockwise, will remain at that temperature. The thermostat can be maintained within a temperature not exceeding 40 °C 104 °F range. Ultra-high temperature over 49 °C, ultra-high temperature switch will automatically trip power off.
Weehomy - 1. Swimming pool thermostat input voltage:220v, Power: 5. 5kw, size: 450 * 105 * 355mm. 4. Automatic heating: the electric pool heater will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on.
When adding hot water bath, start the pump, the thermostat automatically heat insulation work, so the water temperature bath maintained at 39 degrees Celsius, give your Jacuzzi to create a more comfortable environment.5
5. The swimming pool water heater operation is fully automated, the heating is on, temperature reaches a preset temperature, indicator light, clockwise, will remain at that temperature.
If cold water is started, will be 6 ~ 8 °C / h elevated temperatures. 3. Heating rate: the electric water heater fit can be maintained within a temperature not exceeding 40 °C 104 °F range. 2. This thermostat is specifically designed for the hot tub, the thermostat is installed in the pipeline jacuzzi.
Junlucki - The water heater will start working when the bathtub is filled with water. It is widely used in the circulation system of a pressurized hot tub to maintain and heat the water temperature. Intelligent self-test systemcomprehensively monitor the operating status of the system, so as to avoid the occurrence of faults such as dry water in the absence of water, and quickly make corresponding judgments and displays, and it is easier for the user or maintenance personnel to judge and maintain the fault.
The installation is located at the bottom level. Easy to install and disassemblethis thermostat features excellent performance, practicality and easy operation.
The swimming pool thermostat good interior circulation, complete functions, not dross, easy removal. Cold water can also be heated, then stop working until the temperature dropped a few degrees, mainly for heating and constant temperature functions. When adding hot water bath, the thermostat automatically heat insulation work, giving your Jacuzzi to create a more comfortable environment.
100% satisfaction guaranteewe offer 12-monthes money-back service for any quality issues and We provide 24-hour online customer service, please don’t hesitate to contact us if you have any questions or suggestions. Our water massage equipment heater does not require any special maintenance or programming, easy to use. Water heater thermostatdesigned for hot and cold tubs, start the pump, this thermostat is suitable for bathtub SPA. Automatic water thermostatautomatic heating thermostat will first reach the preset temperature, the thermostat automatically turns on.
Topchances - Note:do not place any electrical appliances within 1. 5 meters of the thermostat. Adjustable temperature range of 20℃-40℃68℉-104℉, the other port is 32mm, time can be freely set. Note:do not use the thermostat in saltwater, or alkaline water. St series pool heaters the thermostat need to be equipped with a circulating water pump above 500w, and the water pressure is higher than 20kpa.
Internal use of international cables, without having to worry about product quality problems during use. Note:one interface is 48mm, please note the size of the pipe before use. Automatic tempreture control the thermostat comes with a temperature probe, which can sensitively sense the temperature of the pool water.
High quality the inner tank of the thermostat is stainless steel, acid water, in line with international standards, and it has a long service life without rust. Safe & reliablethe pool heater has multiple protections, short circuit to the power supply line, ultra-high temperature, safety and reliability - over-current, and water flow protection.2
220v - 240v / 50 ~ 60hzpower supply according to the power of the thermostat equipped with the appropriate power cord, the power supply for the 220v - 240V / 50 ~ 60Hz, the thermostat comes with the 3-pin power cord connected to the terminal near the terminal box, brown fire line that L terminal, blue The dyed line is the N terminal, and the yellow and green lines are connected to the ground line. The heating can automatically adjust to the set value of the thermostat. It is suitable for heating constant temperature systems such as small hot springs, swimming pools. Capacity:no more than 2cbm528 gallon;suitable For: Max 2CBM528 gallon Hot Tub & Swimming Pool Equipment.
Topchances - Pool heater5kw/11kw/15kw pool heaters are special used for small pool less than 10cbm, it improves greatly of trouble free in working time, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch, massage pool and hot spring to heat and keep warm; Meanwhile, 3KW heaters work for tub less than 530 gallon, adaptability of water environment and stability.
Manual reset temperature control switchonce unexpected high temperature 60C occurs, resolve the fault and wait the temperature to fall below normal temperature, the temperature switch cuts off the system.
You need to cut off the main power supply, then press the ‘Reset’ button to restart the heater. Intelligent self-diagnose functionthe control system keeps on monitoring the running status of every parts of the heater, and quickly reacts and displays corresponding hint message for any incident, so as to avoid any damage or malfunction happens.
With this advanced control system, the traditional mechanical water flow sensor is replaced by modern digital temperature sensor, and the features of the temperature. Automatic heatingthermostat will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on. Unique control systemwe are professionals in producing and developing heaters for over 10 years. St and phs are the newest generation with our unique control system.
LinChao - Reliable leakage protection equipment must be installed, it must be installed and debugged by a certified electrician, and checked and maintained monthly.
Direct heating requires the use of more powerful machines. The matching water pump below 11kw must have a power of not less than 750W and a flow rate of not less than 13 cubic hours per hour. Operation sequence: turn on the water pump first, then turn on the thermostat.
It's advanced performance and quality is the optimum liquid transport pump on the industrial equipments. When shutting down, ranging from 10 seconds to 1 minute, wait for a while depending on the power of the thermostat, turn off the thermostat first, and then turn off the water pump. The effect of auxiliary heating is better.
VEVOR - The heating can automatically adjust to the set value of the thermostat. Simple operation - the internal circulation of the water heater is smooth, with no scum. Internal use of international cables, in line with international standards, without having to worry about product quality problems during use.
Lucsiky - Please read the instructions and precautions carefully before use. After the water temperature is burned, uniform heat dissipation, unplug the power plug before using it and wait 20 seconds for safety Comprehensive anti-scalding design, prevent scalding.
Lecxin - It can also be used as the auxiliary heating of heat pumps. The control system constantly monitors the operation status of each part of the heater, responds quickly and displays corresponding prompt information to avoid any damage or failure.
Weehomy - 1. Swimming pool thermostat input voltage:220v, Power: 5. 5kw, size: 450 * 105 * 355mm. 4. Automatic heating: the electric pool heater will first reach the preset temperature, then stop working until the temperature dropped a few degrees, the thermostat automatically turns on.
Junlucki - The water heater will start working when the bathtub is filled with water. It is widely used in the circulation system of a pressurized hot tub to maintain and heat the water temperature. Intelligent self-test systemcomprehensively monitor the operating status of the system, so as to avoid the occurrence of faults such as dry water in the absence of water, and quickly make corresponding judgments and displays, and it is easier for the user or maintenance personnel to judge and maintain the fault.
Topchances - Note:do not place any electrical appliances within 1. 5 meters of the thermostat. Adjustable temperature range of 20℃-40℃68℉-104℉, the other port is 32mm, time can be freely set. Note:do not use the thermostat in saltwater, or alkaline water. St series pool heaters the thermostat need to be equipped with a circulating water pump above 500w, and the water pressure is higher than 20kpa.
Topchances - Pool heater5kw/11kw/15kw pool heaters are special used for small pool less than 10cbm, it improves greatly of trouble free in working time, can be a assistant for heat pump in heating. This product adopts latest constant temperature controller- -temperature sensor replaces traditional magnetic flow switch, massage pool and hot spring to heat and keep warm; Meanwhile, 3KW heaters work for tub less than 530 gallon, adaptability of water environment and stability.
LinChao - Reliable leakage protection equipment must be installed, it must be installed and debugged by a certified electrician, and checked and maintained monthly.
