As an Amazon Associate I earn from qualifying purchases.1. Neewer
Max Load: 3.3lb/1.5kg, ST41, Mirrorless Camera, Swivel Tilt Monitor Holder with Cold Shoe for DSLR Camera, NEEWER Field Monitor Mount for 5" and 7" Monitors
Neewer - 360° swivel / 170° tiltthe monitor mount can tilt back and forth in a range of 170° and rotate at 360° to let you find the best angle for monitoring, adding more flexibility for filming. Note: please remember to use the L-shaped hex key to tighten the thumbscrew after mounting your field monitor.
Monitor mount with cold shoedesigned with a top 1/4"-20 thumbscrew to securely hold your 5" or 7" field monitor, this monitor mount features a cold shoe at its base to mount onto a DSLR camera, mirrorless camera, or a camera cage.
Maximum weight capacity: 3. 3 lbs 1. 5 kg. The top screw is also suitable for mounting LED video lights and microphones. Durable aluminum alloythanks to its high-quality aluminum alloy material the mount is tough, corrosion-resistant and lightweight for outdoor video creation.
Wrench included to adjust axis tightnessthe mount comes with an l-shaped hex key to adjust axis tightness as needed. Non-scratch silicone padthe mounting plate features a non-slip, patterned silicone pad that adds stability and prevents your monitor from getting marked or scratched. The thumbscrew with holes can also be tightened by the key to prevent the monitor from shaking and dropping.
| Brand | Neewer |
| Manufacturer | NEEWER |
| Weight | 0.07 kg (0.15 Pounds) |
| Part Number | 10101026 |
| Model | 10101026 |
2. Neway
Swivel and Tilt Angle Adjustable for Camera Monitor, Video Lighjt, Shooting Accessories, Neway Field Monitor Mount Holder with Cold Shoe Base
Neway - Easy installation and fixingThe tightness of the monitor mount holder can be adjusted with an Allen wrench and knob. Wide applicationssuitable for filed monitor, flash light, tripod, recorder, led fill light, cellphone clamp holder and any devices with 1/4" hole or cold shoe port.
The max load of this mount is 1. 6kg. Rubber cushionthis camera monitor mount comes with rubber cushions on top of the holder, which can increase the friction and protects the monitor from scratching.
Durable materialmade of strong aluminum alloy and stainless steel, which make it lightweight and durable at the same time. What you get1 x mount adapter, 1 x Hexagon spanner, 1 x 1/4" screw.
3. Nitze
N54-F3, Nitze Field Monitor Mount Swivel and Tilt Adjustable Low Profile Monitor Holder 1/4”-20 Screws to 1/4”-20 Screw
Nitze - 2. The monitor holder mount supports 180° tilt and 360° swivel with free stop. 3. N54-f3 monitor holder mount locked by two 1/4” screws can be mounted to any cages and accessories with 1/4” threaded holes.
It can help you to fix the monitor cage, and it is easy to disassemble. 5. The holes on the thumbscrew support to be more tightened by using the attached hex spanner after rotating the thumbscrew to lock the monitor.
4. There is a rubber pad on the top of the monitor holder mount, which can effectively prevent friction and scratching with the monitor or monitor cage. Damping design can be adjusted by screwing and loosing the M4 screws. 1. This new n54-f3 monitor holder mount has reduced volume and weight compared to the previous model, but its well-designed structure allows it to load up to 3 kg.
| Brand | Nitze |
| Manufacturer | NITZE EU |
| Height | 5.4 cm (2.13 Inches) |
| Length | 3.2 cm (1.26 Inches) |
| Weight | 0.06 kg (0.13 Pounds) |
| Width | 2.9 cm (1.14 Inches) |
| Part Number | N54-F3 |
4. Neewer
NEEWER Adjustable Field Monitor Mount, 360° Rotatable Camera Monitor Bracket with 1/4" Threads Compatible with DJI RS 2 RSC 2 RS 3 RS 3 Pro Gimbal Stabilizers, GA005
Neewer - Wide compatibility compatible with dji ronin-s ronin-sc rs 2 RSC 2 RS 3 RS 3 Pro gimbal stablizers, this mounting tool helps you attach a field monitor to one of these gimbals. The damping is adjustable via an included L shaped hex key.
Robust construction made of premium black anodized CNC machined aluminum alloy, this bracket ensures high durability and lightweight portability for outdoor filmmaking, photography, and vlogging.
Secure installation connected via two M4 screws, this field monitor holder also features a Rosette mount and an integrated thumbscrew that allow you to install it with incredible security.
360° smooth rotation with 360° damping rotation movement, it enables you to tilt and flip the field monitor for the most optimal positions. Multiple mounting points three 1/4” threads let you mount an interview microphone, articulating magic arm, super clamp, and other accessories to the bracket.
| Brand | Neewer |
| Manufacturer | NEEWER |
| Weight | 0.13 kg (0.29 Pounds) |
| Part Number | 10101767 |
| Model | 10101767 |
5. SMALLRIG
Field Monitor Holder with 360° Swivel and 140° Tilt, Max Payload 1.2kg/2.6lb, BSE2346B, SMALLRIG Camera Monitor Mount with Cold Shoe Adapter for 5'' and 7'' Monitor
SMALLRIG - The size of the thumb screw head protrudes out, making it easy to wring. For monitor: smallrig pan and tilt monitor mount with cold shoe adapter BSE2346 is designed to attach your monitor to the top of the camera or other mounting system with a cold shoe.
Both thumb screws have holes for the Allen key to tighten the monitor. Rotation adjustment: the monitor holder can be swivelled 360° to the side and tilted 140°, so you can hold your monitor in any position without tools.
Rubber cushion: the monitor mount has a rubber cushion on the top that protects your monitor from scratches. It supports 5" and 7" monitors up to 1. 2 kg. Tool-free installation: the monitor mount can be tightened by hand with the thumb screw.
Cold shoe adapter: the monitor holder comes with a cold shoe adapter that allows you to attach many smaLLRIG accessories such as the SMALLRIG Cold Shoe 2260/1960, the SMALLRIG BMPCC 4K Cage 2203 and the SMALLRIG Wooden Handle 2093. Note: please do not adjust the rotation and tilt without attaching a monitor or light, as this may damage the inner screws.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 3 cm (1.18 Inches) |
| Length | 4.6 cm (1.81 Inches) |
| Weight | 0.08 kg (0.18 Pounds) |
| Width | 4.99 cm (1.96 Inches) |
| Part Number | 2346-CF |
| Model | 2346-CF |
6. ANDYCINE
ANDYCINE Field Monitor Mount Vlogger Field Monitor Holder Tilt 176 Degree Swivel 360 Degree with Screw Fixture Camera EDC Tools Box for 5 /7inch MonitorVersion 1.3
ANDYCINE - Wide applications. Bottom with standard shoe and 1/4 inch screw easily attached to camera hot shoe, camera rigs. Suitable for flash, Camera Microphone, on camera led lights, on camera monitor etc.
Upper with 1/4 inch screw which can quick release and attach to camera monitors, led lights. The rubber spacer protecting your gears as well as secure your on camera gears. Multi angles adjustable. Works fine with atom hdr with 2 XF970 Battery Packs About 1.
4kgs. 3x m3 knots with the allen key you can always setting up a comfortable angels. Small and light handy hot shoe only weight 42g. Max load 3. 2kg. Offering 360 degree rotation and 176 degree·tilt adjustment An ideal product on finding the best view angels for shooting in motivation and best friends for vloggers, youtubers, photographers.
7. SMALLRIG
SMALLRIG Quick Release EVF Mount Field Monitor Mount with Built-in NATO Rail and NATO Clamp – 2113
SMALLRIG - 360° rotationsmallrig evf mount 2113 is designed to hold an evf or a filed monitor in place. You could also mount a smallrig monitor Mount 2100 on this EVF mount to build a personalized rig.
The bracket part features a NATO rail. Related accessoriesusually, you could attach this evf mount to a nato rail smallrig nato rail 1409 or a Cage feature built-in NATO rail. Then you could lock the NATO clamp with the red locking lever. You could rotate it 360 degrees to find the best viewing angle of your EVF/monitor.
What you get: 1 x evf support with nato rail, 2 x 1/4 screw; 1x M5 screw, 1 x Allen Wrench. Quick releasewith the nato clamp on one end, you could attach it to a NATO rail in seconds. 1. 5 kg load capacityit comes with a wingnut to adjust the damping of the monitor mount to adapt monitors of different weights. Note: the maximum load of this monitor holder is 1. 5kg.
| Brand | SMALLRIG |
| Manufacturer | SMALLRIG |
| Height | 4.7 cm (1.85 Inches) |
| Length | 11 cm (4.33 Inches) |
| Weight | 0.13 kg (0.28 Pounds) |
| Width | 6.7 cm (2.64 Inches) |
| Part Number | 2113-CF |
| Model | 2113-CF |
8. Hopcd
DSLR Camera Video Monitors Arm Shoe Mount L Bracket for FEELWORLD F5 F6 F6S S55 FW567 FW568, Hopcd Camera Field Monitor Mount
Hopcd - Easy to install on camera cold shoes or any 1/4inch standard interface. The stand is equipped with a cold shoes holder, such as microphone, LED lamp, which can be used to install various devices, wireless receiver, etc.
Made of premium aluminium alloy material, which is solid, durable for long time usage. It can be rotated 360°, which is convenient for users to monitor from any angle. Suitable for feelworld f5 f6 f6s s55 fw567 FW568 camera monitors.
| Brand | Hopcd |
| Manufacturer | Hopcd |
| Height | 0 cm (0 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.08 kg (0.17 Pounds) |
| Width | 0 cm (0 Inches) |
| Part Number | Hopcd6x2qti9ykg |
9. Neewer
NEEWER Field Monitor Mount for 5" and 7" Monitors, Microphone, Swivel Monitor Holder with 1/4”-20 Screws and Silicone Pad for LED Video Light, Max Load: 3.3lb/1.5kg, ST42
Neewer - Maximum weight capacity: 3. 3 lbs 1. 5 kg. Monitor mount with 1/4”-20 screwsmounted by two 1/4”-20 screws, video rig, the compact holder can secure your field monitor to a camera cage, or handgrip. Note: please remember to use the L-shaped hex key to tighten the thumbscrew after mounting your field monitor.
360° swivel / 170° tiltthe monitor mount can tilt back and forth in a range of 170° and rotate at 360° to let you find the best angle for monitoring.
The top 1/4”-20 mounting screw is compatible with most 5” or 7” field monitors under 3. 3lb 1. 5kg. Durable aluminum alloyits high-quality aluminum alloy material makes the mount tough, corrosion resistant and light weight for outdoor video creation.
Axis tension adjustableuse the included l-shaped hex key to adjust the axis tension and keep your monitor more securely attached. Non-scratch silicone padthe mounting plate features a non-slip, patterned silicone pad that adds stability and prevents scratches on your monitor. The thumbscrew with holes can also be tightened by the key to prevent monitor from shaking and dropping.
| Brand | Neewer |
| Manufacturer | NEEWER |
| Weight | 0.09 kg (0.19 Pounds) |
| Part Number | 10101027 |
| Model | 10101027 |
10. zoopper
Field Monitor Holder Mount Camera Monitor Mount with Cold Shoe Adapter Tilt 180 Degree Swivel 360 Degree for 5" and 7" Monitor
zoopper - It features 1/4"-20 screw on the top for monitor, light, or microphone. The size of the thumbscrew head is increased so that it’s easy to install. Firm lockingthe field monitor holder connects with monitor firmly via a 1/4-20 screw on the bottom.
New upgradethe new upgrade has improved many shortcomings, and the hexagonal screw hole is reserved, the fixed knob is enlarged, which is easier to install and makes your monitor safe. Rubber cushion on the top is utilized to prevent the monitor from scratching.
Small and light handy cold shoe only weight 42g. The max load of this monitor mount is 1. 5kg. What you get 1*cold shoe monitor mount adapter, our worry-free 12-month warranty, welcome guide, 1*hexagonal knob, and friendly customer service.
For 5" or 7" field monitor swivel and tilt adjustable monitor mount with cold Shoe Mount is designed to hold your monitor onto the top of the camera or other mounting system via cold shoe adapter. Materialsmade of aluminum alloy, is very sturdy and solid. It can effectively prevent twist and don't need to worry about the monitor fall off. Both thumbscrews features holes for hex spanner to ensure your monitor safe.
| Brand | zoopper |
| Manufacturer | zoopper |
| Weight | 0.04 kg (0.09 Pounds) |
| Part Number | YT-001 |
Neewer - 360° swivel / 170° tiltthe monitor mount can tilt back and forth in a range of 170° and rotate at 360° to let you find the best angle for monitoring, adding more flexibility for filming. Note: please remember to use the L-shaped hex key to tighten the thumbscrew after mounting your field monitor.
Neway - Easy installation and fixingThe tightness of the monitor mount holder can be adjusted with an Allen wrench and knob. Wide applicationssuitable for filed monitor, flash light, tripod, recorder, led fill light, cellphone clamp holder and any devices with 1/4" hole or cold shoe port.
Nitze - 2. The monitor holder mount supports 180° tilt and 360° swivel with free stop. 3. N54-f3 monitor holder mount locked by two 1/4” screws can be mounted to any cages and accessories with 1/4” threaded holes.
Neewer - Wide compatibility compatible with dji ronin-s ronin-sc rs 2 RSC 2 RS 3 RS 3 Pro gimbal stablizers, this mounting tool helps you attach a field monitor to one of these gimbals. The damping is adjustable via an included L shaped hex key.
SMALLRIG - The size of the thumb screw head protrudes out, making it easy to wring. For monitor: smallrig pan and tilt monitor mount with cold shoe adapter BSE2346 is designed to attach your monitor to the top of the camera or other mounting system with a cold shoe.
ANDYCINE - Wide applications. Bottom with standard shoe and 1/4 inch screw easily attached to camera hot shoe, camera rigs. Suitable for flash, Camera Microphone, on camera led lights, on camera monitor etc.
SMALLRIG - 360° rotationsmallrig evf mount 2113 is designed to hold an evf or a filed monitor in place. You could also mount a smallrig monitor Mount 2100 on this EVF mount to build a personalized rig.
Hopcd - Easy to install on camera cold shoes or any 1/4inch standard interface. The stand is equipped with a cold shoes holder, such as microphone, LED lamp, which can be used to install various devices, wireless receiver, etc. Made of premium aluminium alloy material, which is solid, durable for long time usage. It can be rotated 360°, which is convenient for users to monitor from any angle. Suitable for feelworld f5 f6 f6s s55 fw567 FW568 camera monitors.
Neewer - Maximum weight capacity: 3. 3 lbs 1. 5 kg. Monitor mount with 1/4”-20 screwsmounted by two 1/4”-20 screws, video rig, the compact holder can secure your field monitor to a camera cage, or handgrip. Note: please remember to use the L-shaped hex key to tighten the thumbscrew after mounting your field monitor.
zoopper - It features 1/4"-20 screw on the top for monitor, light, or microphone. The size of the thumbscrew head is increased so that it’s easy to install. Firm lockingthe field monitor holder connects with monitor firmly via a 1/4-20 screw on the bottom.